 |
|
a. The LCD module
shall be installed flat, without twisting or bending.
b. COF or FPC has narrow pattern width, so easily become open
circuit by external force. DO NOT apply pressure to COF or FPC
especially in bending area. |
 |
|
c. To avoid damage
in appearance or malfunction, DO NOT subject the module to mechanical
shock or to excessive force on its surface. |
 |
|
d. The polarizer attached
to the display is very easy to damage, handle it with care to
avoid scratching. |
 |
|
e. To avoid contamination
on the display surface, DO NOT touch the display surface with
bare hands.
f. Provide a space so that the LCD module does not come into
contact with other components. |
 |
|
g. To protect the
LCD panel from external pressure, put covering glass (acrylic
board or similar board) to keep appropriate space between them.
|
 |
|
h. Be careful for
condensation at sudden temperature change. Condensation makes
damage to polarizer or electrical contacted parts. And after
fading condensation, smear or spot will occur. |
 |
|
i. Property of semiconductor
devices may be affected when they are exposed to light possibly
resulting in malfunctioning of the ICs. To prevent such malfunctioning
of the ICs, your design and mounting layout done are so that
the IC is not exposed to light in actual use. |
 |
|
j. Strong light exposure
causes degradation of color filter. It may not recover |
 |
|
k. DO NOT contact
with water to avoid Metal corrosion.
l. When it is not in use, the screen must be turned off or the
pattern must be frequently changed by a screen saver. If it
displays the same pattern for a long period of time, brightness
down/image sticking may develop due to the LCD structure. |
 |
|
m. Never disassemble
LCD product under any circumstances. If unqualified operators
or users assemble the product after disassembling it, it may
not function or its operation may be seriously affected. |
